Homeowners, did you know that dark color roofs consume more energy than that of a light color one? Research has shown that almost 90% of roofs in the United States were not designed properly.  These roofs are made of dark non-reflective materials that absorb heat and causes the surface of the roof’s temperature to increase more than normal.
Isn’t this a very uncomfortable position to be living in, especially during hot summer days when the temperature escalates? But there is good news, according to a report generated by the Office of Scientific and Technical Information (OSTI)   “several experiments on individual residential buildings in California and Florida show that coating roofs white reduces summertime average daily air-conditioning electricity use from 2–63%”.
With this knowledge, new and existing homeowners are now turning to energy saving roofing systems to help control the temperature in their buildings. Although it may be challenging to install an energy roof, it will work out best in the long run because overtime you will see a decrease in your utility bills.
The topics covered in this article will strengthen your knowledge on the benefits of having an energy saving roofing system.
Here are the topics:

What is an Energy Saving Roofing System?
What does it mean to have an Energy Roof?
Benefits of having an Energy Saving System
What are the choices available?
Cool Roofing System

Type of cool roofs

Green Roofing System

What can I plant on a Green Roof?

How to find an Energy Saving Roofing System?

What is an Energy Saving Roofing System?
Unlike standard roofs, this roof is design so that it can reflects more sunlight and absorbs less heat. If there are no air conditioner units in a building, an energy saving roofing system will keep the entire building cool thus providing a cooler indoor environment.
What does it mean to have an Energy Saving Roofing System?
Without an energy saving roofing system, these 5 things, amongst others, will happen: –

The use of more energy
Excessive and uncomfortable indoor heat
Higher utility bills
Air pollution
Increase roofing maintenance cost

Having an energy saving roof means that your roof will be able to block the heat of the sun instead of absorbing it. If your roof absorbs the heat from the sun it will slowly transfer the air inside the building and the hot air will warm up the interior of the building, causing you discomfort.  So, because of the heat, especially during the summers many homeowners turn to air conditioners, which are very costly and use a lot of energy.
Therefore, having an energy saving roofing system like will result in less energy cost and a more comfortable atmosphere.
Benefits of having an Energy Saving Roofing System
If you ae planning on installing an energy efficient roof, most likely, you will not be disappointed because there are several benefits that can be derived from such amove. Such benefits include, but not limited to: –

Cooler Temperature

Energy saving roofing system will keep the overall temperature of your building cooler, leaving you feeling more comfortable, especially on warm days. During winters, a good system will also keep you warm, thus helping to reduce the energy cost of heaters.

Savings on Utility Bills

The Cool Roof Rating Council estimated that homeowners who have installed an energy saving system, save between 7% to 15% on utility bills. This is amazing news, because it’ the aim of everyone to save money from their utility bills.

Environmental Friendly

They are also a cost-effective way to help preserve the environment because a decrease in the consumption of energy will have a positive impact on the planet. Moreover, it will require less use of air-conditioners which will reflect in less demand for energy.

Low Maintenance Cost

Most energy saving roofs do not require high maintenance because they have a longer life span than other normal roofing system.

Better Air Quality

Air quality will improve because there will be little pollutant in the atmosphere. In overpopulated cities, carbon monoxide and other gases will be tremendously reduced, which will result in a cleaner atmosphere.

Tax Rebate

Your energy saving roof can earn you tax rebates as well. There may be some stipulation but it is good to consider signing up for the rebate option if you are thinking about installing a cool roof. You can also talk to your roofing contractor and he will be able to provide you with more information about the rebate option.
What are the choices available?
The material that is used for an energy saving roof is different from that of a conventional roof. However, there are various choices available,  but cool roofing seems to be the preferred choice.
Cool Roofing System
Don’t be alarmed if you should come across the term “cool roofing”, it’s the same as an energy saving roof.
Although cool roofing seems to be a new technique it has been around for a long time and is said to be one of the most popular and effective energy saving roofing system. They vary in style and are designed to match the structure of the building and enhance the durability of the roof by reducing heat.
Types of cool roofs
They are many different types of cool roofs, for example: –

Low-Sloped Roofs

One outstanding feature of a low -sloped roof is that of its flat roof line that provides high quality drainage. It is also a suitable energy saving roofing candidate because it has a large surface area.
Some of the cool roofing system techniques that are used for low-sloped roofs are: –

The use of a foam material to top the surface of the roof for insulation purpose. This is a very dependable type of cool roofing technique that has been in used for several years and does not require high maintenance. It is also referred to as Foam Roof.


A paint-like finish can also be used as another cool roofing technique. This is done by using cool paint coatings, which in most cases are energy star rated and doesn’t necessarily have to be white paint, to help minimize the effect of the sun. This technique can be added to a lot of existing roofs such as asphalt, metal, or any other single-ply roofs. It is also referred to as Coated Roof.


Mod-Bit or Modified Bitumen is a durable asphalt roofing system that has a long proven track record and can be used in either cold or warm temperatures.


Steep-Sloped Roofs

Steep-sloped roofs are mostly used among homeowners, but low-sloped roofs are mostly used on commercial buildings. The cool roof techniques for steep-sloped roofs differs due to the way they are built. Materials that are used on a sloped roof for cooling are like asphalt shingles, tiles, shakes, and metal roofing.
A study conducted by the South Coast Air Quality Management District and the University of Southern California revealed that some cool roof materials will increase ozone and fine particulate pollution levels.
Our advice therefore, is that you use only certified roofing materials for your energy saving roofing system. There are more than 3,000 ENERGY STAR®-rated cool roofing materials available that the  EPA has authorized. You can visit the ENERGY STAR website and choose from the list based on type of building, roof, and location.
Asphalt shingles and metal roofs are amongst the favorite materials for cool roof installation. Asphalt shingles are made from fiberglass and has a very low solar reflectance. Because they are inexpensive and easy to install they are widely used by homeowners.
Metal roofs are long lasting, light-weight, water- resistance, and can be re-cycled. A metal roof will keep a building cooler than a normal roof because it has a solar reflectance of over 60%.
The cost for installing a cool roofing system is said to be pretty much affordable but depends on the slope of your roof and the type of material that you chose to use. But as we all know, cost tend to vary based on certain conditions. If you have a sloped-roof then you can expect to pay anywhere between $0.65 – $1.70 per square foot, while single ply membrane may cost anywhere between $2.00 – $3.50 per square foot.
It is best if you compare prices from different manufacturers before deciding on a purchase.
Green Roofing System
Green roofs are roofs that are covered with vegetation and soil, meaning, roofs that you can plant either vegetables or anything of your choice.  According to the Environment Protection Agency (EPA), green roofs reduce heat transfer through the roof of a building, improve indoor comfort and reduce heat stress associated with heat waves.
What can I plant on a Green Roof?
It’s up to your choice and taste. It also depends on your location and the effect you will get from the direct sunlight on your plants. You can turn your roof into a vegetable garden, or even a flower garden. The main aim is that whatever you chose to plant will assist to keep your building cool and that your roof is well maintained.
There are various factors that must be taken into consideration to arrive at the cost of installing a green roof. Such factors are: –

type of roofing membrane
drainage system
use of fencing or railings
type of plants
amount of plants

Therefore, a simple green roof may cost up to $12 per square foot, while a more elaborate one may cost approximately $30 per square foot. It was reported that prices may increase within the U.S. market due to a high market demand, so act now if you need to install one.
It is important that a green roof is maintained so that the aesthetic of your building will always be pleasing to the eye. There are three main stages that should be taken into consideration for maintenance.

Nursing Maintenance – as the name suggest, you will take care of the young vegetation by ensuring that it gets sufficient water, especially in dry season. If plants are missing, replant them as necessary and remove unwanted weeds from the vegetation.


Development Maintenance – this is the stage in which you will make sure that you support the vegetation until it is fully mature to be left on its own.


Up-Keep Maintenance – remember that you will have to make sure that your roof is neat and tidy, so you will need to have frequents check to make sure that your roof is not congested by unwanted plants or weeds.

How to find Energy Saving Roofing System?
The first place you should look for an energy saving roofing system is on the Energy Star Roofing website. There you will get all the information regarding energy saving roofing products. According to the website, Energy Star certified roof products can help reduce the amount of air conditioning needed in buildings, and can reduce peak cooling demand by 10-15 percent.
You can also contact the manufacturer of the energy saving roofing system that you are interested in and ask for detailed information about the product. Your roofing contractor may also be able to assist you, so don’t hesitate to ask him for his advice.
New advancement in roofing technology is providing new ways and means to eliminate heat from homes and businesses. Considering an investment in an energy saving roofing system will be a wise move because in the long run you will cut down on large utility bills as well as having a cool and comfortable indoor experience, especially during the summer.

For home owners who are looking to do a reroofing work but balancing both aesthetics and cost efficiency, mixed with of course durability to withstand the ever changing weather conditions, a composition shingles roof or asphalt shingles installation is the plausible and reasonable solution.
In a highly competitive and usually saturated market with a lot of roofing options to choose from, asphalt shingles runs top in the list as the most popular and best roofing material.
While not as durable and long-lasting as some of the more premium roofing material such as metal, cedar shakes, slate, or clay tiles, asphalt shingles can provide an adequate protection and sufficient aesthetic appeal at only a fraction of the cost of other systems.
There are actually two types of asphalt shingles roof material or composition: the organic and the fiberglass.
Organic shingles are based on paper saturated with asphalt to make it waterproof mixed with coatings of adhesive salt and ceramic granules embedded on top.
Fiberglass shingles are often made with a base layer of glass fiber reinforcing mat. This mat is coated with asphalt, which contains mineral fillers and makes the shingle waterproof.
While organic shingles are more durable than fiberglass ones, they are more flammable and hence more prone to fire. They are less environmentally-friendly due to their high asphalt (oil based) content.
Fiberglass shingles offer excellent fire protection based on residential roofing shingles reviews.
Presently, fiberglass shingles are more commonly used and are slowly, but surely, replacing the organic roof shingles types.
Below are the categories to which these materials were ranked providing the output of it being the most popular and sought after roofing material:
1. Affordability
The greatest advantage of asphalt shingles roof would be the relatively low upfront cost. So far, this is the most affordable roofing option in short term and will provide a home a decent protection which would last for 12 to 15 years if maintained properly.
2. Comes in a variety of style
Since the asphalt shingles prices are very much affordable and cheap, it doesn’t mean that lacks the style. Asphalt shingles are manufactured in almost all colors which includes blue, yellow, red and green. Numerous options and patterns are also available allowing one to create an attractive custom look that will greatly enhance and raise value and appearance of your home.
3. Ease in the installation
Unlike the other materials which would eventually require specialized training and experience to properly install, any certified roofing contractors who makes the best roofing shingles installation possible can do the work. It is even possible for a homeowner skilled in DIY projects to install an asphalt shingles of their own.
Moreover, while asphalt shingles comes in many roof shingle colors and may not be the lightest material around, they are light weight enough to be installed in any roof without requiring additional structural support.
The usual asphalt shingle can be installed just in a matter of days since no other required tools, skills or equipment are needed.
Just to be fair, there are also some disadvantages of choosing asphalt shingles as your primary roofing material. Asphalt shingles can get damaged easily if installed at below freezing temperatures.
Some cheaper and unregistered grades of asphalt shingles are susceptible to wind uplift and would not perform at their best when exposed to high or hot temperatures.
There are also some negative impact to the environment when one opts to go to asphalt shingle option. They are petroleum based products; manufacturing of shingles wastes a lot of energy and worsens green house gas emissions.

So, you have that dreaded leak coming through the roof in your house! Or, perhaps, you’re looking for an upgrade and want to enhance the beauty and value of your home, and you the skills of a professional roofer. How do you go about selecting one that is, not only capable of doing the job, but will do it in a cost effective manner and professionally? After all, how many of us are going to go up onto the roof to inspect it after the job has been completed? Not many of us would be brave enough to do that, so we have be sure that the roofer we hire is trustworthy and takes pride in the job that they do.
Below are some helpful hints on how you might go about selecting a licensed roofing contractor to carry out the work on your home (or office):
Ideally you will be able to count on friends, relatives or colleagues for referrals. Perhaps one or two of them have had work done on their properties and were happy with the job that was done. If this is the case, then you’re probably going to be better off seeking out those referred roofers, rather than taking pot luck by choosing one from the YellowPages or Google.
In the same way you can seek recommendations of good roofers, you can also find out about which roofers to stay right away from. If any of your friends have had bad experiences with these types of contractors, they will be sure to let you know. And then, regardless of the quoted price that you might be given, you should stay away from these companies, or you may come to regret it.
If you can’t get referrals from family or friends, then go online and look for the reviews that have been left on various independent review sites. There are many sites, such as Google My Business, Yelp, Kudzu and so on. Be careful though….it has been found, on occasion, that some businesses will get false reviews put online, so this should just be the first step in your quest to find a good roofing company. If you find a lot of negative reviews about a single company, then obviously you should steer clear of them.
Licensing, Bonding, and Insurance:
There are reasons why cities, counties and states require roofers to be licensed and bonded. The main reason is for our protection. We obviously don’t just want anybody going onto our property and working on our roofs. If the job is done incorrectly, not only would we have to get it done again, but it could also, potentially, end up costing of thousands of dollars in additional damage being done to our homes.
Each region will have its own ordinances determining why types of registration each roofer must have. So it would be a good idea for you to check with your local licensing office to find out why licensing and insurance coverage you should be checking that your chosen roofer has.
When you find the roofer that you want to hire, make sure you ask for physical proof of licensing and insurance. Don’t just take their word for it. If they can’t show you this, or are unwilling to do so, then don’t hire them – (and report them to your local licensing office, so they can be checked out to determine if they are a legitimate roofing contractor).
Customer care:
If, during your search to find a good roofer, you find you take several attempts to get to speak to someone, then this should be a red-flag to you. If you’re having this problem before the job is carried out, then what would it be like afterwards, and if you’re then having problems that need to be rectified? So before you finalize a contract with your chosen company, it might be worth making a few test phone calls to the office to see how promptly they answer and how courteous their staff members are.
If you didn’t get any kind of personal recommendation, then it would be worth seeking out references before hiring a builder. Keep in mind that they are only going to give you details of customers who are happy with the work that was provided. So it is still worth going online to carry out your own investigations about the company before hiring them.

When it comes to roofing repairs, home-owners have a variety of options to select from. Each kind of roofing system has its own unique advantages and disadvantages. The one you pick ought to not only match the appearance of your home but be durable and well fit to the ecological conditions of the area, also.
Asphalt Roofs
When building a new house or replacing the roofing on an old one, you have four standard types of materials to pick from. The most common, without a doubt, is the asphalt shingle. Asphalt is a cost effective and popular option in the northeastern part of the USA because it provides great insulation against the cold weather. However, the problem with asphalt roofing is that it doesn’t last as long as other materials that are used to cover roofs. You can probably expect an asphalt roof to last about 20 years or so, before it starts to degrade.
Metal Roofs
Metal roofing, though not nearly as typical, is a pretty good choice of roof for most types of buildings. It will certainly cost more than asphalt (sometimes as much as 2 or 3 times as much), however it can easily last for over 50 years. Metal roofing is very resilient and will need fewer repairs over its lifetime. However it does have it’s own drawbacks. Aside from the price, metal roof offers hardly any insulation from the cold. This problem is often addressed by setting up a metal roofing system straight over an existing asphalt roofing system, thus maintaining the insulation qualities of the asphalt. The metal roof will act as protector of the asphalt in this case, and therefore allow the asphalt roof underneath to last longer.

Different Types of Metal Used In Roofing
Cedar Roofs
Cedar roof offers a significant quantity of insulation, but is also more costly than asphalt roof repair. Though cedar is naturally more insect and weather resistant than other wood types, it will not last long unless it is well preserved. Any individual acquainted with what happens to wood when left outdoors will understand that it takes a great deal of maintenance for it to continue to be in good condition. While cedar is probably not the best choice for homes in colder, wetter climates, its rustic and rugged great looks make it visually appealing. So while cedar is a great idea for a wood cabin. it wouldn’t be advisable to place this on a regular house.
Stone Roofs
Stone roofing such as slate or tile is extremely durable, and can last over 100 years. It looks terrific, supplies exceptional insulation and is very durable in a moisture rich and often freezing environment. The drawbacks of installing stone roofs though, is that sadly, these can be very brittle and can quickly break under moderate weight, making them difficult and expensive to deal with. Like metal roofs and cedar roofs, stone roofs can also be rather expensive to install.
Roof Installation Pricing
Depending on the size of your home, an asphalt home can cost you somewhere between $3,000 and $6,000 to add to your home. Slate and tile roof installations are typically in the $10,000 to $15,000 range. Metal roof repair and cedar roofing differ in cost, however usually expense someplace in between asphalt and stone.

Roof repair ranks near the top of the list when it comes to commonplace house improvements that can benefit huge from going green. After all, your roof is directly exposed to heat, cold, and sunlight make it an excellent prospect for enhancing your house’s total energy performance. And since your roof is likewise your house’s most important line of defense when it pertains to securing you and yours from the aspects, it’s easy to see why homeowners across the country are drawn to the quality craftsmanship and high expectations that green renovation is known for.
Environment-friendly Metal Roofing
If you go into it with a green frame of mind, metal roofing is plainly among the greenest roofing items on the market. Why? You can buy metal roofings made from recycled materials; a metal roof is recyclable once again when you tear it off; and on top of that, metal roofings are long lasting, long lasting, and energy-efficient, as well. They do not come without a couple of potential mistakes, nevertheless, which is why we’ve assembled this guide on green metal roof to assist you make your new metal roofing repair as green as possible.
Green Roofing with David Johnston
There’s nobody better to walk you through the ins and outs of making certain your metal roofing system setup is as green as they come than David Johnston, founder of the green consulting company What’s Working, Inc., author of the Nautilus Award winning book Green Remodeling: Changing the World One Room at a Time, and HomeAdvisor’s point man on all things green. Here is some of Johnston’s advice on what you can do to turn your metal roof into a green metal roofing system.
Energy Efficiency and Green Metal Roofing
Choosing a greener metal roofing often translates into more affordable energy costs down the road. Right here’s what you can expect from your new metal roofing in the energy savings department, and a few things you can do to increase your energy savings even more.
Metal Roofing is Cool Roofing– Metal roof is referred to as a “cool” roofing material because it transmits far less heat from the sun down into your attic than other products such as asphalt shingle roof. Primarily that’s due to the fact that metal roofings are thinner and can’t retain as much heat, though the color you decide to repaint your roofing system can also make a distinction.
Install Light Colored Roofing– With metal, a galvanized surface or white created roofing is perfect. Light colored roof reflects, instead of takes in, heat from the sun. The result is a cooler house and minimized cooling bills, especially if you have air conditioning ductwork in the attic.
Install Radiant Heat Barriers– Radiant heat obstacles are a thin layer of metal insulation (normally tin foil with a paper backing or a metalized mylar sheeting), which can minimize radiant heat transfer into your attic by as much as 95 percent when set up to the underside of your roofing system.
Install Rainwater Catch Systems– Because metal roofing systems channel water so efficiently, and they don’t have toxic elements like asphalt shingles, they are the best roofing material for a rainwater catch system. By installing cisterns or drums to capture valuable rainwater and runoff for landscaping use, you can conserve cash on the month-to-month water bill.
Health Considerations and Green Metal Roofing
Johnston is quick to mention that contrary to common belief, green improvement isn’t really everything about enhancing energy efficiency. It’s just as much about developing more comfy, more secure, and much healthier homes. Right here are a couple of basic steps you can take to guarantee that health is a priority throughout and after the time that your new roofing system is set up.
Just Purchase Lead-Free Metal Roofing– Be sure that your metal roof is lead-free in both the metal alloy and your roofing system’s finish. Even percentages of lead can lead to psychological and physical problems in fetuses and children, reduced coordination and brainpowers in adults, and kidney damage, blood damage, and even increased blood pressure. Prevent it at all costs!
Employ a Quality Contractor– A badly set up roof can leakage wetness into your attic, which can cause water damage, rot, and mold growth; the last of which has been proven to add to a variety of serious health issues. Make sure you work with a roofing professional who know the ins and outs of dealing with metal roofings (avoiding the cross contact of different alloys, and adopting roof profiles with hidden screws and clips, for instance) to help guarantee you won’t get any nasty surprises a couple of years down the road.
Build a Steep Sloped Roof– A metal roofing with a steep pitch discourages standing water, leakage, ice dams, and heavy snow buildup. That means less chance of wetness penetration and roof repair failure, and a reduced risk of water damage and mold growth.
Supply Adequate Attic Ventilation– Proper attic ventilation is vital to a healthy, green roofing system. Ridge vents, soffit vents, and gable vents all help to keep air distributing, which results in a cooler attic and home in the summertime and minimized condensation build-up in the attic in the winter season, which can result in water damage, rot, and mold development.
Eco-friendly Metal Roofing and the Environment
Obviously, at the heart of any green metal roofing is ecological stewardship. While metal roofing is as eco-friendly as roofing materials come, here are some suggestions from Johnston to assist you see to it you’ve left no stones unturned.
Purchase Recycled Content Metal Roofing– Metal roof repair can be made from aluminum, copper, or steel, and can be acquired with recycled material contents as high as 100 percent. That implies less waste gets sent out to the garbage dumps, and less energy is lost throughout production. From an ecological perspective, the more recycled content, the merrier.
Minimize Waste & Recycle Materials– Measure your roofing and order roofing materials carefully to reduce waste. Also, keep in mind that 85 to 90 percent of remodel waste is recyclable, either by reusing it or dealing with it at facilities that will certainly recycle the materials. Finally, if you’re changing an older metal roofing system with a new one, keep in mind that none of your old roofing material must go to the garbage dump.
Energy Efficiency– All those energy savings that metal roofing will certainly offer you for many years is good for the environment, too. High energy performance implies reduced fossil fuel usage, which is becoming increasingly more crucial as fuel supplies decrease and the detrimental effects of worldwide warming continue to emerge.
Determining the True Value of Going Green with Your New Metal Roof
What’s it going to cost you if you go green with your metal roofing? Probably not any more than if you don’t, to be honest. You may pay a portion more for recycled content metal roof and the included energy efficiency of a radiant heat barrier, but when you consider energy savings with time and the higher quality setup that goes together with green building approaches, you’ll most likely generate income by selecting green in the end. That said, Johnston is quick to warn house owners versus getting caught up in “the payback trap” of green renovation. While it’s true that a green metal roof may save you a few bucks on your energies in the long term, going green deserves a lot more than a person can measure in dollars and cents. Environment-friendly roofings are healthier, longer lasting, lower upkeep roofing solutions. When you figure in the fact that you’ll be making a commitment to passing a much better world onto your youngsters and grandchildren, it’s simple to see what Johnston indicates when he says that the true value of going green is far higher than any expense price quote can indicate.
If you think green is the ideal selection for you, make sure to talk to your specialist about embracing a green building approach, discover a service provider who concentrates on green structure and renovation, or seek the services of a green consulting company to assist you prepare and create the best, and greenest, roof you possibly can.

In some locations of the country, tile roof repair is fairly common. Its unique appearance can be seen sparsely in lots of regions, however in the Southwest, tile roofing is virtually a part of the landscape, offering an unique and identifiable look to the location. Tile roofings are at first a lot more pricey to install than asphalt shingle, metal, or wood shake roofs, however they also last much longer. Depending upon the quality, a tile roofing might last 50 to 70 years– or even more! When you compare that type of longevity to the durability of some asphalt shingles (in some situations, just 10 or 15 years), it’s simple to see how an investment in tile can pay off in the long run.
Qualities of Tile Roofing
Traditional clay tile roofs are very heavy, and sometimes need more structural support than other roofing materials. However, tile roofing is now offered in new lightweight variations which can be used on a lot of structures without additional support.
While many homeowners choose the appearance of traditional Spanish and Mediterranean styles, tile roof repair is also available in precise duplications of shake, wood shingle, and slate. Roof tile can be discovered in a wide spectrum of colors, varying from the popular adobe red to colors that are reminiscent of moss green, driftwood grey, and ocean blue.
Advantages of Tile Roofs
Aside from the evident aesthetic appeal and extremely long life expectancy of a tiled roof system, there are a number of other benefits of selecting this roofing material over a less expensive one. To start with, tiled roof systems perform much better under severe conditions than many other roof materials. They resist damage caused by cyclones, earthquakes, and other weather extremes better than many other roof repair choices. A tiled roof is also fire resistant, and brings a class-A rating.
Tiled roof is a fantastic insulator, which assists to keep houses warmer in winter and cooler in summer. Accessories for tiled roofs are commonly assorted, including bird stops, cloaked attic vents, hip beginners, pinnacles, and multiple other choices. Tile also has the distinct ability of being able to accent or complement the outside color or surface of almost any home or building.
Much more attractive than its outward appearance is that a tiled roof offers an air of quality to a structure that can be really attracting prospective purchasers. When integrated with the variety of designs and surfaces tile can be found in, tiled roofs not only enhances the appeal of a structure, it can likewise enhance its resale value.
Disadvantages of Tile Roofs
Obviously, the greatest disadvantage to a tiled roof is its initial repair expense. When compared with asphalt shingles or perhaps fundamental metal roof, tile roofs can cost several times as much to put up. They are, nevertheless, similar in cost to slate roofs– they’re just other kinds of roof material that can hold up as long or exceed the life span of tile. Additionally, tiled roof systems (and slate roofs, also) are not only heavy, but brittle. Not just may they require added structural reinforcement to install, however when an issue does occur, they can be tough to deal with considering that the individual tiles can break under the weight of a worker.

Flat roofs are most typically found in locations with little or no rain, although they are found in other parts of the country too. While they are a cost-effective selection from a building point of view, they can be a problem when it comes water leakage and accumulation. In order to preserve flat roofs, and the homes underneath them, they need to be covered with a good water-proof material, and be furnished with a great drainage system. Below are a few of the most popular flat roof styles, along with a few advantages and disadvantages.
Developed Roofing
Developed roof repair, also known as Built up roof repair, is a generic term for a roof system that is actually built by adding layers. Built up roof repairs are frequently made from rotating layers of roof felt with different waterproofing products, consisting of coal tar pitch, asphalt, cold application adhesive, and modified asphalt. It is also called “tar and gravel” roof, since it’s rounded off with a final layer of gravel, crushed rock, or other mineral substance, in order to reduce sun damage.
The other popular built up roof style is a modified bitumen roofing (MBR). MBR’s are made from fiberglass-based asphalt sheeting, applied in layers with mopped-on hot bitumen between each.
Built-up roof repair is more frequently found on commercial structures than on residential homes, but it’s still well fit for residences with flat roofs. While built-up roof is the most affordable selection of flat roofing, sunlight will ultimately break down the asphalt base and the roofing will certainly need to be changed more quickly than other types of roofs.
Single-Ply Roofs.
Single-ply roofing systems are the most reliable, popular, and practical, flat roofing solutions in the marketplace. There are two main types:

Thermoset membranes are made from rubber polymers, and need the use of liquid adhesive or tape to form a water tight seal at the overlaps.
Thermoplastic membranes, made from plastic polymers, have joints formed with heat or chemical welding. Most thermoplastic membranes include a support layer of polyester or fiberglass for increased strength and stability, also.

Either way, these single ply roofing products, more frequently referred to as rubber, or plastic, roof repair membranes, are probably the best option if you have to repair a flat roof. They’ll cost a little bit more than built up roof products to repair, but they will last a lot longer with far fewer issues. Any extra preliminary expenses are well worth it in the long run.
Sprayed Polyurethane Foam (SPF).
Sprayed polyurethane foam is a relatively new product that is sprayed onto the roof as a liquid in order to form a single, continuous, smooth structure. Since foam is flexible and lightweight, it’s perfect for irregularly shaped roofs and protrusions. For re-roofing, SPF likewise gets rid of the need to remove the old roofing, since it can be used straight over existing roof installations. SPF consists of asphalt shingles, built-up roofing’s, clay tile, concrete, metal, and wood. Foam roofs are simple to keep, and with a high insulation value, they can battle a few of the heat issues typical with flat roofs. The only drawback is SPF’s performance history. It just does not have much of one yet, so you’re taking a bit of a risk by going with this product.
Employ an Experienced Roofer.
Unfortunately, flat roof repair is never a DIY task. You’ll need to employ a seasoned roofer to apply any of the above pointed out roof repair options. If you’re in need of flat roof repair services, you should call a professional about getting your roof repair task underway.

When you hear the words “metal roof” your creativity may right away create photos of old-fashioned tin roofing systems, rustic and ridged. Nevertheless, there have been major advances in the design and renovation, thereby making these roofing systems more stylish, resilient, and an enhancing popular option among house owners. In fact, there are now several alternatives offered to customers relying on the look you want. Often consisting of recycled metals– such as copper, tin, aluminum, and stainless-steel– and these surface areas can even be designed to imitate standard shingles, while still providing a streamlined, modern-day twist.
Metal roofing systems are understood for their toughness. In fact the majority of the time they include a 30-50 year guarantee and generally endure through the period of any real estate structure. Plus, they’re incredibly light-weight compared with old-fashioned shingles, makings for fast installation. This permits them to be laid over any pre-existing surface area and gets rid of the requirement for inefficient, time-consuming demolition.
Here are some other resistant benefits of metal roof repair:

Resistance: Due to their strong composition, they can withstand any type of weather condition. Whether it is hurricane winds, pesky pests, or heavy precipitation, they can withstand any environment. Plus, they’re rot-proof and rust-resistant (if effectively galvanized).
Fireproof: They are non-combustible, which might save you some cash on your insurance coverage premiums (unless they are laid over pre-existing combustible products, such as wood shingles). And no, they disappear prone to lighting (lighting strikes at any peak no matter the product, but if this includes your home, you may wish to think about investing in a lighting rod).
Watertight: They’re best for sealing out any water. And due to their slick emerging, snow buildup can slide off quick and simple.
Energy Efficient: They reflect light during the summertime, saving money on energy expenses. And though insulation is not thoroughly used in metal roofing systems, there should be a gap between exterior surfaces and the roofing structure.

Of course, like any roofing system, they’re not perfect. However even their fundamental downfalls can quickly be avoided.
Expense: They’re not cheap (typically $200-$500 per every 100 square feet). But given that they’re so long lasting, if you plan on living in your home for an extended amount of time, there will certainly be a guaranteed return on your investment (this likewise includes value to the home).
Noisy: When it pours, it’ll sound like someone’s drumming on your home. But there are ways to weaken the sound: soundproof insulation or sheathing are 2 choices.
Denting: Usually they are more prone to hail damage, but some items ensure against denting, even versus foot prints.
Slippery: Although their slickness can be advantageous, if you need to walk on top of your house, you might have to view your step. However some metal roofs are textured in order to assist mimic the look of asphalt shingles and for that reason act as a slip guard too.
Upkeep & Hiring Roofing Contractors
Metal roof repair is essentially maintenance-free and easy to clean. However it can also quickly be scratched or dulled. And if it’s painted (which it usually is) it can also chip, so it’ll need to be re coated every few years. They’re generally leak-proof, seepage can take place around joints. Nevertheless, if there is seepage, it’s normally not due to leaks however condensation that’s formed underneath the surface because of improper ventilation during repair. So for the preliminary repair and larger repair services, make certain you work with a qualified roofing professional who has experience with metal roof. This is an unusual surface area, which is part of its appeal, but it likewise implies they need an expert who is trained in comprehending their distinct improvement and practices, such as their tendency to expand and contract with time.

Roofs are the most important part of a home’s weatherproofing, so it’s vital that you choose roofing materials that are up to the task. However, since different roof types are likely to perform better in different situations, buying roofing materials is a matter of finding the right fit in both style and performance. A little research on different types of roofing materials is likely to pay off in a big way down the road, as having the right roof type is going to reduce your maintenance needs as well as make replacement a less frequent occurrence.
Common Types of Roofing Materials
There are a number of roofing materials out there to choose from, but by far the most prominent in residential applications are asphalt, metal, and tile. Each type of roofing material is a perfect fit for some properties, but a poor choice for others. Much of this depends on the environment you live in, your budget, and how long you plan on residing in the house.
Asphalt Shingle Roofing is by far the most common and economical, roof material in the country. Since it is often less than half the cost of other materials, asphalt is often chosen simply for its affordability. Its appearance might be less than stunning in many cases, but a good quality asphalt roof will hold up for several decades and do a sufficient job of protecting your property. Also, because it is the most common type of roofing material, it shouldn’t be difficult to find an affordable contractor to repair, replace, or install asphalt shingles.
Metal Roofing comes in several different styles. Standard metal roofing comes in large panels that attach to your roof decking and are ideal for areas where heavy snowfall is prevalent and where fire danger is high. Metal roofing tiles and shingles are also available, though they are typically more costly than panel-style metal roofing materials. All metal roofing products are likely to last for a very long time (and often carry a warranty for 40 or more years); additionally, if you speak with your insurance company before you install a metal roof, you may be able to get a reduction in your insurance premiums due to the added safety metal-topped houses carry. Metal is more expensive than asphalt and its appearance doesn’t appeal to everyone, but if you are in the market for a new roof, this material is well worth looking into.
Tile Roofing Materials are high end installations that are as costly as they are attractive. Traditional tile roofing (generally a burnt orange color) is a favorite of the southwest; its appearance is unique, but its performance may be an even bigger draw for many homeowners. Tile roofing materials can last for more than 70 years in the right environment, but in areas where hurricanes, tornados, hailstorms, or heavy snow and ice accumulations are an issue, tile may be more of a hassle than its hefty price tag would suggest. Additionally, because it is a very specialized material, it may be very difficult in some areas of the country to find an experienced installer or repair company. If you are thinking of installing tile roofing materials on a house that has a different roof type in place, you should be aware that this material is far heavier than other roofing options and may require some structural adjustments be made to your home in order to handle the extra weight.
Other Types of Roofing Materials
Cedar shingles will cost more than asphalt shingles, but they make up for it in looks. If you are diligent about treating them with water sealer every few years, they will last as long or longer than their asphalt counterparts. Concrete shingles have risen to premier roofing status in the past few years. They are virtually indestructible and come in a wide variety of colors, shapes, and styles. Concrete roofing isn’t cheap, but it’s probably the last roof you’ll ever have to buy. Slate roofing is as high-end as it gets; much like traditional tile, slate roofs are extremely expensive, but in the right situation have been known to last over 100 years! Of available roof types, slate is one of the least common; however, if you can find an experienced installer and you’ve got plenty of money in your roofing budget, this might be just the roofing material you’ve been looking for.
Buying Roofing Materials
Once you’ve decided what material you’re looking for, it’s time to call the roofing contractor. Better yet, call a bunch of them so you can compare estimates. While not always a stead-fast rule, it is often a good idea to disregard bids that are far higher or far lower than the norm. Also, go with your gut. Remember, this person is going to repair or replace one of the single most important aspects of your home. Making sure they’re someone you’re comfortable with and can trust can’t be understated. Once you’ve found someone that fits that bill, let them guide you through. They’re the experts, and while they will give you a number of choices, from materials on up to guarantees, it’s always good to listen to their advice.