Homeowners, did you know that dark color roofs consume more energy than that of a light color one? Research has shown that almost 90% of roofs in the United States were not designed properly.  These roofs are made of dark non-reflective materials that absorb heat and causes the surface of the roof’s temperature to increase more than normal.
Isn’t this a very uncomfortable position to be living in, especially during hot summer days when the temperature escalates? But there is good news, according to a report generated by the Office of Scientific and Technical Information (OSTI)   “several experiments on individual residential buildings in California and Florida show that coating roofs white reduces summertime average daily air-conditioning electricity use from 2–63%”.
With this knowledge, new and existing homeowners are now turning to energy saving roofing systems to help control the temperature in their buildings. Although it may be challenging to install an energy roof, it will work out best in the long run because overtime you will see a decrease in your utility bills.
The topics covered in this article will strengthen your knowledge on the benefits of having an energy saving roofing system.
Here are the topics:

What is an Energy Saving Roofing System?
What does it mean to have an Energy Roof?
Benefits of having an Energy Saving System
What are the choices available?
Cool Roofing System

Type of cool roofs

Green Roofing System

What can I plant on a Green Roof?

How to find an Energy Saving Roofing System?

What is an Energy Saving Roofing System?
Unlike standard roofs, this roof is design so that it can reflects more sunlight and absorbs less heat. If there are no air conditioner units in a building, an energy saving roofing system will keep the entire building cool thus providing a cooler indoor environment.
What does it mean to have an Energy Saving Roofing System?
Without an energy saving roofing system, these 5 things, amongst others, will happen: –

The use of more energy
Excessive and uncomfortable indoor heat
Higher utility bills
Air pollution
Increase roofing maintenance cost

Having an energy saving roof means that your roof will be able to block the heat of the sun instead of absorbing it. If your roof absorbs the heat from the sun it will slowly transfer the air inside the building and the hot air will warm up the interior of the building, causing you discomfort.  So, because of the heat, especially during the summers many homeowners turn to air conditioners, which are very costly and use a lot of energy.
Therefore, having an energy saving roofing system like will result in less energy cost and a more comfortable atmosphere.
Benefits of having an Energy Saving Roofing System
If you ae planning on installing an energy efficient roof, most likely, you will not be disappointed because there are several benefits that can be derived from such amove. Such benefits include, but not limited to: –

Cooler Temperature

Energy saving roofing system will keep the overall temperature of your building cooler, leaving you feeling more comfortable, especially on warm days. During winters, a good system will also keep you warm, thus helping to reduce the energy cost of heaters.

Savings on Utility Bills

The Cool Roof Rating Council estimated that homeowners who have installed an energy saving system, save between 7% to 15% on utility bills. This is amazing news, because it’ the aim of everyone to save money from their utility bills.

Environmental Friendly

They are also a cost-effective way to help preserve the environment because a decrease in the consumption of energy will have a positive impact on the planet. Moreover, it will require less use of air-conditioners which will reflect in less demand for energy.

Low Maintenance Cost

Most energy saving roofs do not require high maintenance because they have a longer life span than other normal roofing system.

Better Air Quality

Air quality will improve because there will be little pollutant in the atmosphere. In overpopulated cities, carbon monoxide and other gases will be tremendously reduced, which will result in a cleaner atmosphere.

Tax Rebate

Your energy saving roof can earn you tax rebates as well. There may be some stipulation but it is good to consider signing up for the rebate option if you are thinking about installing a cool roof. You can also talk to your roofing contractor and he will be able to provide you with more information about the rebate option.
What are the choices available?
The material that is used for an energy saving roof is different from that of a conventional roof. However, there are various choices available,  but cool roofing seems to be the preferred choice.
Cool Roofing System
Don’t be alarmed if you should come across the term “cool roofing”, it’s the same as an energy saving roof.
Although cool roofing seems to be a new technique it has been around for a long time and is said to be one of the most popular and effective energy saving roofing system. They vary in style and are designed to match the structure of the building and enhance the durability of the roof by reducing heat.
Types of cool roofs
They are many different types of cool roofs, for example: –

Low-Sloped Roofs

One outstanding feature of a low -sloped roof is that of its flat roof line that provides high quality drainage. It is also a suitable energy saving roofing candidate because it has a large surface area.
Some of the cool roofing system techniques that are used for low-sloped roofs are: –

The use of a foam material to top the surface of the roof for insulation purpose. This is a very dependable type of cool roofing technique that has been in used for several years and does not require high maintenance. It is also referred to as Foam Roof.


A paint-like finish can also be used as another cool roofing technique. This is done by using cool paint coatings, which in most cases are energy star rated and doesn’t necessarily have to be white paint, to help minimize the effect of the sun. This technique can be added to a lot of existing roofs such as asphalt, metal, or any other single-ply roofs. It is also referred to as Coated Roof.


Mod-Bit or Modified Bitumen is a durable asphalt roofing system that has a long proven track record and can be used in either cold or warm temperatures.


Steep-Sloped Roofs

Steep-sloped roofs are mostly used among homeowners, but low-sloped roofs are mostly used on commercial buildings. The cool roof techniques for steep-sloped roofs differs due to the way they are built. Materials that are used on a sloped roof for cooling are like asphalt shingles, tiles, shakes, and metal roofing.
A study conducted by the South Coast Air Quality Management District and the University of Southern California revealed that some cool roof materials will increase ozone and fine particulate pollution levels.
Our advice therefore, is that you use only certified roofing materials for your energy saving roofing system. There are more than 3,000 ENERGY STAR®-rated cool roofing materials available that the  EPA has authorized. You can visit the ENERGY STAR website and choose from the list based on type of building, roof, and location.
Asphalt shingles and metal roofs are amongst the favorite materials for cool roof installation. Asphalt shingles are made from fiberglass and has a very low solar reflectance. Because they are inexpensive and easy to install they are widely used by homeowners.
Metal roofs are long lasting, light-weight, water- resistance, and can be re-cycled. A metal roof will keep a building cooler than a normal roof because it has a solar reflectance of over 60%.
The cost for installing a cool roofing system is said to be pretty much affordable but depends on the slope of your roof and the type of material that you chose to use. But as we all know, cost tend to vary based on certain conditions. If you have a sloped-roof then you can expect to pay anywhere between $0.65 – $1.70 per square foot, while single ply membrane may cost anywhere between $2.00 – $3.50 per square foot.
It is best if you compare prices from different manufacturers before deciding on a purchase.
Green Roofing System
Green roofs are roofs that are covered with vegetation and soil, meaning, roofs that you can plant either vegetables or anything of your choice.  According to the Environment Protection Agency (EPA), green roofs reduce heat transfer through the roof of a building, improve indoor comfort and reduce heat stress associated with heat waves.
What can I plant on a Green Roof?
It’s up to your choice and taste. It also depends on your location and the effect you will get from the direct sunlight on your plants. You can turn your roof into a vegetable garden, or even a flower garden. The main aim is that whatever you chose to plant will assist to keep your building cool and that your roof is well maintained.
There are various factors that must be taken into consideration to arrive at the cost of installing a green roof. Such factors are: –

type of roofing membrane
drainage system
use of fencing or railings
type of plants
amount of plants

Therefore, a simple green roof may cost up to $12 per square foot, while a more elaborate one may cost approximately $30 per square foot. It was reported that prices may increase within the U.S. market due to a high market demand, so act now if you need to install one.
It is important that a green roof is maintained so that the aesthetic of your building will always be pleasing to the eye. There are three main stages that should be taken into consideration for maintenance.

Nursing Maintenance – as the name suggest, you will take care of the young vegetation by ensuring that it gets sufficient water, especially in dry season. If plants are missing, replant them as necessary and remove unwanted weeds from the vegetation.


Development Maintenance – this is the stage in which you will make sure that you support the vegetation until it is fully mature to be left on its own.


Up-Keep Maintenance – remember that you will have to make sure that your roof is neat and tidy, so you will need to have frequents check to make sure that your roof is not congested by unwanted plants or weeds.

How to find Energy Saving Roofing System?
The first place you should look for an energy saving roofing system is on the Energy Star Roofing website. There you will get all the information regarding energy saving roofing products. According to the website, Energy Star certified roof products can help reduce the amount of air conditioning needed in buildings, and can reduce peak cooling demand by 10-15 percent.
You can also contact the manufacturer of the energy saving roofing system that you are interested in and ask for detailed information about the product. Your roofing contractor may also be able to assist you, so don’t hesitate to ask him for his advice.
New advancement in roofing technology is providing new ways and means to eliminate heat from homes and businesses. Considering an investment in an energy saving roofing system will be a wise move because in the long run you will cut down on large utility bills as well as having a cool and comfortable indoor experience, especially during the summer.

So, you have that dreaded leak coming through the roof in your house! Or, perhaps, you’re looking for an upgrade and want to enhance the beauty and value of your home, and you the skills of a professional roofer. How do you go about selecting one that is, not only capable of doing the job, but will do it in a cost effective manner and professionally? After all, how many of us are going to go up onto the roof to inspect it after the job has been completed? Not many of us would be brave enough to do that, so we have be sure that the roofer we hire is trustworthy and takes pride in the job that they do.
Below are some helpful hints on how you might go about selecting a licensed roofing contractor to carry out the work on your home (or office):
Ideally you will be able to count on friends, relatives or colleagues for referrals. Perhaps one or two of them have had work done on their properties and were happy with the job that was done. If this is the case, then you’re probably going to be better off seeking out those referred roofers, rather than taking pot luck by choosing one from the YellowPages or Google.
In the same way you can seek recommendations of good roofers, you can also find out about which roofers to stay right away from. If any of your friends have had bad experiences with these types of contractors, they will be sure to let you know. And then, regardless of the quoted price that you might be given, you should stay away from these companies, or you may come to regret it.
If you can’t get referrals from family or friends, then go online and look for the reviews that have been left on various independent review sites. There are many sites, such as Google My Business, Yelp, Kudzu and so on. Be careful though….it has been found, on occasion, that some businesses will get false reviews put online, so this should just be the first step in your quest to find a good roofing company. If you find a lot of negative reviews about a single company, then obviously you should steer clear of them.
Licensing, Bonding, and Insurance:
There are reasons why cities, counties and states require roofers to be licensed and bonded. The main reason is for our protection. We obviously don’t just want anybody going onto our property and working on our roofs. If the job is done incorrectly, not only would we have to get it done again, but it could also, potentially, end up costing of thousands of dollars in additional damage being done to our homes.
Each region will have its own ordinances determining why types of registration each roofer must have. So it would be a good idea for you to check with your local licensing office to find out why licensing and insurance coverage you should be checking that your chosen roofer has.
When you find the roofer that you want to hire, make sure you ask for physical proof of licensing and insurance. Don’t just take their word for it. If they can’t show you this, or are unwilling to do so, then don’t hire them – (and report them to your local licensing office, so they can be checked out to determine if they are a legitimate roofing contractor).
Customer care:
If, during your search to find a good roofer, you find you take several attempts to get to speak to someone, then this should be a red-flag to you. If you’re having this problem before the job is carried out, then what would it be like afterwards, and if you’re then having problems that need to be rectified? So before you finalize a contract with your chosen company, it might be worth making a few test phone calls to the office to see how promptly they answer and how courteous their staff members are.
If you didn’t get any kind of personal recommendation, then it would be worth seeking out references before hiring a builder. Keep in mind that they are only going to give you details of customers who are happy with the work that was provided. So it is still worth going online to carry out your own investigations about the company before hiring them.

Roof repair ranks near the top of the list when it comes to commonplace house improvements that can benefit huge from going green. After all, your roof is directly exposed to heat, cold, and sunlight make it an excellent prospect for enhancing your house’s total energy performance. And since your roof is likewise your house’s most important line of defense when it pertains to securing you and yours from the aspects, it’s easy to see why homeowners across the country are drawn to the quality craftsmanship and high expectations that green renovation is known for.
Environment-friendly Metal Roofing
If you go into it with a green frame of mind, metal roofing is plainly among the greenest roofing items on the market. Why? You can buy metal roofings made from recycled materials; a metal roof is recyclable once again when you tear it off; and on top of that, metal roofings are long lasting, long lasting, and energy-efficient, as well. They do not come without a couple of potential mistakes, nevertheless, which is why we’ve assembled this guide on green metal roof to assist you make your new metal roofing repair as green as possible.
Green Roofing with David Johnston
There’s nobody better to walk you through the ins and outs of making certain your metal roofing system setup is as green as they come than David Johnston, founder of the green consulting company What’s Working, Inc., author of the Nautilus Award winning book Green Remodeling: Changing the World One Room at a Time, and HomeAdvisor’s point man on all things green. Here is some of Johnston’s advice on what you can do to turn your metal roof into a green metal roofing system.
Energy Efficiency and Green Metal Roofing
Choosing a greener metal roofing often translates into more affordable energy costs down the road. Right here’s what you can expect from your new metal roofing in the energy savings department, and a few things you can do to increase your energy savings even more.
Metal Roofing is Cool Roofing– Metal roof is referred to as a “cool” roofing material because it transmits far less heat from the sun down into your attic than other products such as asphalt shingle roof. Primarily that’s due to the fact that metal roofings are thinner and can’t retain as much heat, though the color you decide to repaint your roofing system can also make a distinction.
Install Light Colored Roofing– With metal, a galvanized surface or white created roofing is perfect. Light colored roof reflects, instead of takes in, heat from the sun. The result is a cooler house and minimized cooling bills, especially if you have air conditioning ductwork in the attic.
Install Radiant Heat Barriers– Radiant heat obstacles are a thin layer of metal insulation (normally tin foil with a paper backing or a metalized mylar sheeting), which can minimize radiant heat transfer into your attic by as much as 95 percent when set up to the underside of your roofing system.
Install Rainwater Catch Systems– Because metal roofing systems channel water so efficiently, and they don’t have toxic elements like asphalt shingles, they are the best roofing material for a rainwater catch system. By installing cisterns or drums to capture valuable rainwater and runoff for landscaping use, you can conserve cash on the month-to-month water bill.
Health Considerations and Green Metal Roofing
Johnston is quick to mention that contrary to common belief, green improvement isn’t really everything about enhancing energy efficiency. It’s just as much about developing more comfy, more secure, and much healthier homes. Right here are a couple of basic steps you can take to guarantee that health is a priority throughout and after the time that your new roofing system is set up.
Just Purchase Lead-Free Metal Roofing– Be sure that your metal roof is lead-free in both the metal alloy and your roofing system’s finish. Even percentages of lead can lead to psychological and physical problems in fetuses and children, reduced coordination and brainpowers in adults, and kidney damage, blood damage, and even increased blood pressure. Prevent it at all costs!
Employ a Quality Contractor– A badly set up roof can leakage wetness into your attic, which can cause water damage, rot, and mold growth; the last of which has been proven to add to a variety of serious health issues. Make sure you work with a roofing professional who know the ins and outs of dealing with metal roofings (avoiding the cross contact of different alloys, and adopting roof profiles with hidden screws and clips, for instance) to help guarantee you won’t get any nasty surprises a couple of years down the road.
Build a Steep Sloped Roof– A metal roofing with a steep pitch discourages standing water, leakage, ice dams, and heavy snow buildup. That means less chance of wetness penetration and roof repair failure, and a reduced risk of water damage and mold growth.
Supply Adequate Attic Ventilation– Proper attic ventilation is vital to a healthy, green roofing system. Ridge vents, soffit vents, and gable vents all help to keep air distributing, which results in a cooler attic and home in the summertime and minimized condensation build-up in the attic in the winter season, which can result in water damage, rot, and mold development.
Eco-friendly Metal Roofing and the Environment
Obviously, at the heart of any green metal roofing is ecological stewardship. While metal roofing is as eco-friendly as roofing materials come, here are some suggestions from Johnston to assist you see to it you’ve left no stones unturned.
Purchase Recycled Content Metal Roofing– Metal roof repair can be made from aluminum, copper, or steel, and can be acquired with recycled material contents as high as 100 percent. That implies less waste gets sent out to the garbage dumps, and less energy is lost throughout production. From an ecological perspective, the more recycled content, the merrier.
Minimize Waste & Recycle Materials– Measure your roofing and order roofing materials carefully to reduce waste. Also, keep in mind that 85 to 90 percent of remodel waste is recyclable, either by reusing it or dealing with it at facilities that will certainly recycle the materials. Finally, if you’re changing an older metal roofing system with a new one, keep in mind that none of your old roofing material must go to the garbage dump.
Energy Efficiency– All those energy savings that metal roofing will certainly offer you for many years is good for the environment, too. High energy performance implies reduced fossil fuel usage, which is becoming increasingly more crucial as fuel supplies decrease and the detrimental effects of worldwide warming continue to emerge.
Determining the True Value of Going Green with Your New Metal Roof
What’s it going to cost you if you go green with your metal roofing? Probably not any more than if you don’t, to be honest. You may pay a portion more for recycled content metal roof and the included energy efficiency of a radiant heat barrier, but when you consider energy savings with time and the higher quality setup that goes together with green building approaches, you’ll most likely generate income by selecting green in the end. That said, Johnston is quick to warn house owners versus getting caught up in “the payback trap” of green renovation. While it’s true that a green metal roof may save you a few bucks on your energies in the long term, going green deserves a lot more than a person can measure in dollars and cents. Environment-friendly roofings are healthier, longer lasting, lower upkeep roofing solutions. When you figure in the fact that you’ll be making a commitment to passing a much better world onto your youngsters and grandchildren, it’s simple to see what Johnston indicates when he says that the true value of going green is far higher than any expense price quote can indicate.
If you think green is the ideal selection for you, make sure to talk to your specialist about embracing a green building approach, discover a service provider who concentrates on green structure and renovation, or seek the services of a green consulting company to assist you prepare and create the best, and greenest, roof you possibly can.

In some locations of the country, tile roof repair is fairly common. Its unique appearance can be seen sparsely in lots of regions, however in the Southwest, tile roofing is virtually a part of the landscape, offering an unique and identifiable look to the location. Tile roofings are at first a lot more pricey to install than asphalt shingle, metal, or wood shake roofs, however they also last much longer. Depending upon the quality, a tile roofing might last 50 to 70 years– or even more! When you compare that type of longevity to the durability of some asphalt shingles (in some situations, just 10 or 15 years), it’s simple to see how an investment in tile can pay off in the long run.
Qualities of Tile Roofing
Traditional clay tile roofs are very heavy, and sometimes need more structural support than other roofing materials. However, tile roofing is now offered in new lightweight variations which can be used on a lot of structures without additional support.
While many homeowners choose the appearance of traditional Spanish and Mediterranean styles, tile roof repair is also available in precise duplications of shake, wood shingle, and slate. Roof tile can be discovered in a wide spectrum of colors, varying from the popular adobe red to colors that are reminiscent of moss green, driftwood grey, and ocean blue.
Advantages of Tile Roofs
Aside from the evident aesthetic appeal and extremely long life expectancy of a tiled roof system, there are a number of other benefits of selecting this roofing material over a less expensive one. To start with, tiled roof systems perform much better under severe conditions than many other roof materials. They resist damage caused by cyclones, earthquakes, and other weather extremes better than many other roof repair choices. A tiled roof is also fire resistant, and brings a class-A rating.
Tiled roof is a fantastic insulator, which assists to keep houses warmer in winter and cooler in summer. Accessories for tiled roofs are commonly assorted, including bird stops, cloaked attic vents, hip beginners, pinnacles, and multiple other choices. Tile also has the distinct ability of being able to accent or complement the outside color or surface of almost any home or building.
Much more attractive than its outward appearance is that a tiled roof offers an air of quality to a structure that can be really attracting prospective purchasers. When integrated with the variety of designs and surfaces tile can be found in, tiled roofs not only enhances the appeal of a structure, it can likewise enhance its resale value.
Disadvantages of Tile Roofs
Obviously, the greatest disadvantage to a tiled roof is its initial repair expense. When compared with asphalt shingles or perhaps fundamental metal roof, tile roofs can cost several times as much to put up. They are, nevertheless, similar in cost to slate roofs– they’re just other kinds of roof material that can hold up as long or exceed the life span of tile. Additionally, tiled roof systems (and slate roofs, also) are not only heavy, but brittle. Not just may they require added structural reinforcement to install, however when an issue does occur, they can be tough to deal with considering that the individual tiles can break under the weight of a worker.

Flat roofs are most typically found in locations with little or no rain, although they are found in other parts of the country too. While they are a cost-effective selection from a building point of view, they can be a problem when it comes water leakage and accumulation. In order to preserve flat roofs, and the homes underneath them, they need to be covered with a good water-proof material, and be furnished with a great drainage system. Below are a few of the most popular flat roof styles, along with a few advantages and disadvantages.
Developed Roofing
Developed roof repair, also known as Built up roof repair, is a generic term for a roof system that is actually built by adding layers. Built up roof repairs are frequently made from rotating layers of roof felt with different waterproofing products, consisting of coal tar pitch, asphalt, cold application adhesive, and modified asphalt. It is also called “tar and gravel” roof, since it’s rounded off with a final layer of gravel, crushed rock, or other mineral substance, in order to reduce sun damage.
The other popular built up roof style is a modified bitumen roofing (MBR). MBR’s are made from fiberglass-based asphalt sheeting, applied in layers with mopped-on hot bitumen between each.
Built-up roof repair is more frequently found on commercial structures than on residential homes, but it’s still well fit for residences with flat roofs. While built-up roof is the most affordable selection of flat roofing, sunlight will ultimately break down the asphalt base and the roofing will certainly need to be changed more quickly than other types of roofs.
Single-Ply Roofs.
Single-ply roofing systems are the most reliable, popular, and practical, flat roofing solutions in the marketplace. There are two main types:

Thermoset membranes are made from rubber polymers, and need the use of liquid adhesive or tape to form a water tight seal at the overlaps.
Thermoplastic membranes, made from plastic polymers, have joints formed with heat or chemical welding. Most thermoplastic membranes include a support layer of polyester or fiberglass for increased strength and stability, also.

Either way, these single ply roofing products, more frequently referred to as rubber, or plastic, roof repair membranes, are probably the best option if you have to repair a flat roof. They’ll cost a little bit more than built up roof products to repair, but they will last a lot longer with far fewer issues. Any extra preliminary expenses are well worth it in the long run.
Sprayed Polyurethane Foam (SPF).
Sprayed polyurethane foam is a relatively new product that is sprayed onto the roof as a liquid in order to form a single, continuous, smooth structure. Since foam is flexible and lightweight, it’s perfect for irregularly shaped roofs and protrusions. For re-roofing, SPF likewise gets rid of the need to remove the old roofing, since it can be used straight over existing roof installations. SPF consists of asphalt shingles, built-up roofing’s, clay tile, concrete, metal, and wood. Foam roofs are simple to keep, and with a high insulation value, they can battle a few of the heat issues typical with flat roofs. The only drawback is SPF’s performance history. It just does not have much of one yet, so you’re taking a bit of a risk by going with this product.
Employ an Experienced Roofer.
Unfortunately, flat roof repair is never a DIY task. You’ll need to employ a seasoned roofer to apply any of the above pointed out roof repair options. If you’re in need of flat roof repair services, you should call a professional about getting your roof repair task underway.

Setting up a new roof is one of the most important, and pricey, home enhancement projects you’ll run into as a property owner. Considering this, and given that your roof is the first line of defense for your home against the elements, it’s important that you hire the best roof repair company possible. Roofing contractors are a dime a dozen, so it’s crucial to follow a few basic rules when finding, selecting, and working with a roofer.

Policies for Hiring a Roofing Contractor

1. Speak to Several Contractors
You should talk to numerous roofing business so you can gauge a truthful and reasonable price range. You most likely do not wish to make your final working with choice on a couple hundred dollars for a project that costs numerous thousand dollars, but you must be wary of any incredibly low or excessively high quotes. Naturally, this will also assist give you plenty of opportunity to build rapport and trust and to adhere to the other guidelines for hiring a roofing system contractor.

2. Research Credentials
Besides speaking to a number of different roofing business, it’s important that you do a little research on the service provider you decide to hire. Trustworthy contractors ought to be certified and willing to provide you with at least 3 references verifying that they do great. As soon as you’ve inspected your roofing companies out and are pleased that they’re legit, employing a roofer is more enjoyable than demanding.

3. Review the Contract and Warranties Closely
Never sign a contract without reading it over carefully. Expert service providers won’t be frustrated by you putting in the time to comprehend the regards to your arrangement, and the majority of will be happy to sit down with you and discuss parts you don’t understand. Also, make certain you understand the warranty that comes with your new roofing system. All products and craftsmanship need to be ensured for at least 5 years, and the roof repair itself should have a 20- to 40-year service warranty.

4. Cover Your Bases
Prior to work begins, make certain to cover your bases. Consult your contractor about whether you need to acquire a permit or not (most roofing companies will look after this as part of their service), and make certain their staff members are covered by employees comp too. Finally, if you’re submitting an insurance coverage claim on your roofing system, make sure that you’ve followed all the required procedures and had all work approved before deal with your brand-new roofing starts.

5. Never ever Pay the Entire Balance Upfront
Never ever pay the entire balance of your new roof upfront. This goes for all huge jobs. If your professional needs this of you, do not sign the agreement. Requesting a deposit as a good faith offering or a payment schedule that parallels the work are quite common and accepted practices. In any case, do not pay with money. Making use of a charge card enhances the chance that, in a worst-case scenario, you can recover your money without expensive litigation.

Finding, Choosing, and Hiring a Roofing Contractor
It’s tough to argue against using the services we offer house owners. We link property owners and house enhancement service providers and follow-up to make sure mutual satisfaction. Each and every specialist in our system is executed a strenuous ten-step screening procedure. This currently takes care of the first 2 rules of employing a roof specialist. But our quality-controlled customer scores and evaluations enables you to see exactly what other homeowners considered individual service providers and roofing installation in general. These evaluations also create an effective incentive for service providers to fulfill and exceed your expectations. Obviously, there is no magic wand, and you can most likely find all this info on your own. But should you need to? We ‘d rather you invest your time planning with one of our trusted roofing professionals for the best roofing system possible for your house.